| 1. To use in one
of the bed ends: |
|
A.
|
Plug the reading light/fan jack into the
jack plug on the interior dome light closest to the bed in which you
wish to use the reading light. |
|
B.
|
To use the reading light, attach the single
C-clip to the overhead canvas support rod. To use the fan, attach
the double C-clips to the overhead canvas support rod. |
| 2. To use the glide-out dinette
or the tip-out galley (on models so equipped): |
|
A.
|
Plug the reading light/fan jack into the
jack receptacle mounted on the interior of the roof near the glide-out
dinette area or the tip-out galley area. |
|
B.
|
To use the reading light, attach the single
C-clip to the overhead canvas support rod. To use the fan, attach
the double C-clips to the overhead canvas support rod. |
3. Prior to closing the trailer,
be sure to unplug the reading light and remove it from the overhead
tent support. |